Recorder Not Turning On

About this task

If your Song Meter Mini Bat 2 appears to be unresponsive, there are a few things you should check to confirm the cause and try some common solutions:

Procedure

  1. Check that all installed batteries are brand-new or freshly charged and properly installed.

    The AA version of the Song Meter Mini Bat 2 must have either four or eight AA batteries installed. If using only four batteries, they must all be installed in the same battery tray. Splitting four batteries between the two trays will result in no power.

    The AA battery tray can have a very tight fit. It is possible for a battery to be held in place by the tray without contacting the positive contact. Ensure each battery is in contact with both the spring on the negative end and the metal contact on the positive end.

  2. Check that the ON/OFF switch is in the ON position.
  3. Press the FUNCTION button several times, and check if any of the FUNCTION LEDs light up.

If any of the LEDs light up in response to your button presses, then the recorder is receiving power. Attempt to pair the recorder with the Song Meter Configurator app (see Pair the Recorder with the Song Meter Configurator App). If your recorder is not displayed in the app's Recorders screen, see App Not Receiving Status Updates.

If none of the FUNCTION LEDs light up at all, your Song Meter Mini Bat 2 may need repair. Contact Wildlife Acoustics Support for further assistance (see Contact Wildlife Acoustics Support).