Checklist: Starting the Deployment

When you arrive at the deployment location, follow these steps to confirm the Song Meter Micro 2 is ready to record.

Procedure

  1. Make sure batteries are oriented correctly and were not knocked loose during travel.
    The Song Meter Micro 2 may turn on even if one battery is installed backwards. Visually confirm that each battery is installed correctly.
  2. Pair with the Song Meter Micro 2 to update its internal clock.
    1. If desired, accept the prompts during pairing to automatically set the recorder's time zone and deployment location to match your mobile device.
  3. Check the recorder's Status screen.
    1. Resolve any SD card error messages you see on the Status screen.
  4. Unpair from the Song Meter Micro 2.
  5. Latch the Song Meter Micro 2 shut, making sure the battery tray ribbon or debris does not block the enclosure from sealing.
  6. Mount and secure the recorder.
    1. Optional: Use a cable lock to secure the recorder.
    2. If you tie the Song Meter Micro 2 to a tree or post, do not overtighten.
      Excess force on the recorder can bend the enclosure and cause water intrusion.
      Young trees may grow and put additional force on the recorder over the duration of a deployment.

Results

The Song Meter Micro 2 automatically runs its recording schedule while it is turned on.