Format the SD Card Using the Recorder's Physical Controls

About this task

You can format an SD card installed in the Song Meter Mini 2 without the Song Meter Configurator app using the recorder's FUNCTION button.

Procedure

  1. Install brand-new or freshly charged batteries into the Song Meter Mini 2.
  2. Insert the SD Card you wish to format into the Song Meter Mini 2's card slot.
  3. Turn on the Song Meter Mini 2.
  4. Tap the FUNCTION button multiple times.

    A green LED will cycle through the four positions to highlight the selected function.

  5. When the Format LED is highlighted, press and hold the FUNCTION button for three seconds.
  6. When the Format LED starts flashing green, let go of the FUNCTION button.

Results

All four LEDs will flash green three times to indicate the format operation was successful.

If all four LEDs flash red six times, it means the format operation was unsuccessful. Check the recorder's STATUS screen in the Song Meter Configurator app for SD Card Error Messages.