Home
SMART API and Command Reference
The SMART System software includes utilities, command-line scripts, and APIs that can be used for additional customized programming of the SMART System.
Executable Programs
smart-ctl
control SMART devices

Terms of Use
Document History
This documentation receives frequent updates, which are described here.
Introduction
Song Meter® with Analysis and Remote Transfer, or SMART™, is a multi-channel, ultrasonic audio recording and analysis platform from Wildlife Acoustics®.
Getting Started
The first time you use a SMART System, we recommend setting it up in an accessible location, such as an office. This will make it easier to configure the SMART and perform any necessary troubleshooting.
Microphone Settings and Schedules
Each microphone connected to a SMART Controller can have its own Setting Profile and Schedule Profile. These profiles determine when the microphone is active; the settings it uses to detect, record, and analyze bat echolocations; and set the scheduling of microphone sensitivity testing and moisture clearing.
SMART Controller Configuration
Before you deploy the SMART System, you should configure basic system and network settings. These include login credentials, date, location, and network configuration settings.
Data Management
The SMART System stores recordings and logs on its internal drive initially, and it can periodically transfer new data to a USB or networked storage drive.
Installing SMART
Installing the SMART System on a wind turbine, meteorological tower, or similar structure requires careful planning. Proper connectivity, grounding, and microphone placement will help ensure a successful deployment.
Bat Activity Alarms and Control System Integration
The SMART System can integrate with a windfarm SCADA network or similar control system to perform acoustically triggered curtailment (ATC). You can define custom alarms that detect bat activity based on custom-defined parameters. When these alarms trigger, you can send control signals to other devices on a control system to trigger turbine shutdowns.
Troubleshooting
Specifications
SMART Enclosure
The SMART Enclosure is a preconfigured, weatherproof enclosure that can be purchased with the SMART System.
SMART API and Command Reference
The SMART System software includes utilities, command-line scripts, and APIs that can be used for additional customized programming of the SMART System.
- Executable Programs
  - smart-bat-sim
    A Bat Alarm simulator for generating Pass and Pulse events
  - smart-check-filter
    check a SMART SCADA filter specification
  - smart-ctl
    control SMART devices
  - smart-daemon
    daemon process to interface with SMART devices
  - smart-dispatcher
    SMART Microphone Scheduler
  - smart-list
    list SMART devices
  - smart-logger
    Periodically log system information for SMART services
  - smart-modbus-probe
    Read or Write local Modbus registers via smart-scada.
  - smart-opcua
    SMART OPC UA Service
  - smart-scada
    SMART SCADA/Modbus Service
  - smart-serial
    SMART Serial Service
  - smart-stream
    stream and process audio from SMART device microphone device
  - smart-stream-wrapper
    A wrapper for smart-stream for scheduling
- Library Functions
Glossary
Warranty
Except as specifically provided herein, Wildlife Acoustics makes no warranty of any kind, express or implied, with respect to this product.
Declaration of Conformity
Prohibition Against Eavesdropping
Patents
Copyright Notices
Contact Information

smart-ctl

control SMART devices

Synopsis


            smart-ctl [ sleep | wake |
               reset | upgrade ]
               serial-number

Description

Request a given SMART device identified by the 6-octet hexadecimal serial-number change state to either sleep, wake, reset. or upgrade

Files

If upgrade is specified, the file /usr/local/share/smart/firmware_%d where %d is the device model number is sent to the device for firmware upgrade. This file is typically a symbolic link to an actual version-specific file.