Fixes an issue where microphones go idle
when the internal hard disk reaches 95% full. Now microphones will
continue to stream for analysis but no new .wav or .zc files will be
created until the disk storage is reduced.
Adds a "Create
diagnostics dump file" button on the "Maintenance" tab to create
dump.zip diagnostic file in logs. This file contains the last 1000 lines
of journal logs from smart services, timestamp with configured
timezone, and all the SMART configuration files. It can then be
downloaded from the "Data" tab and sent to the Wildlife Acoustics
support team.
11.7 (2023-05-26)
Adds a “Disable when heater is on” option on the Settings
Profiles Tab to disable analysis of signals while the heater
is turned on. This will prevent false triggers in situations
where a noisy power supply introduces noise through the
heater.
Adds a "Qual" bat call parameter to SMART alarm criteria.
Improves GUANO metadata in recordings to include
additional information such as which microphone sensor is
being used, if the heater is on, etc.
Explicitly disables auto-updates of the Controller’s
Ubuntu operating system.
Changes the default settings profile to disable the
heater.
1.1.6 (2023-05-01)
Fixed a conflict when using SCADA alarms simultaneously with Serial outputs.
Fixed "Clear Settings" button on the SCADA tab of the web interface.
1.1.4 (2023-03-21)
Added a user-defined script hook to microphone calibration events.
Fixed a potential problem where a communications error on one microphone in a multi-microphone system might not recover automatically.
1.1.3 (2023-02-20)
Added user-defined script hook to SCADA alarm events.
1.1.2 (2022-02-16)
Added per-pulse and per-pass alarm descriptions to the SCADA page for logging.
Added a global log file to track SCADA/Modbus alarm activity.
Changed the SCADA page and documentation nomenclature around alarms for clarity.
The Data page can now access global log files as well as per-microphone log files.
1.1.1 (2022-12-21)
Fix problem with Auto-ID species codes output as random characters in results.csv file.