Export Diagnostics File to an SD Card Using the Recorder's Physical Controls

About this task

This procedure exports two files to the Song Meter Mini Bat 2's SD card:

  • Diagnostics File: [RECORDER NAME]_[DATE]_[TIME].minidiags

  • Configuration File: [RECORDER NAME].miniconfig

    This is a file containing all of the recorder's settings. See Manage Configuration Files for more information about how this file can be used.

Procedure

  1. Install new or fully charged batteries, and set the ON/OFF switch to ON.
  2. Press the FUNCTION button once.

    The Diags LED will be highlighted green, and the three other LEDs will be unlit.

  3. Press and hold the FUNCTION button for three seconds.
  4. When the Diags LED starts flashing green, let go of the FUNCTION button.

Results

All four LEDs will flash green three times to indicate that the .minidiags and .miniconfig files have been saved to the SD card.

If all four LEDs flash red six times, it means an error prevented the recorder from saving these two files. If this happens, check that the SD card has available space and displays no error messages on the recorder's Status screen (see Status Screen).